--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.rst	Tue Sep 01 15:57:24 2020 +0100
@@ -0,0 +1,62 @@
+============
+Zebra-0.1.0
+============
+
+Usage:
+
+::
+
+    from zebra import Zebra
+
+    z = Zebra( [queue] )
+      Constructor with optional printer queue
+
+    z.getqueues()
+      Return a list containing available printer queues
+
+    z.setqueue( queue )
+      Set the printer queue
+
+    z.setup( direct_thermal=None, label_height=None, label_width=None )
+      Set up the label printer using EPL2. Parameters are not set if they are None.
+      Not necessary if using AutoSense (hold feed button while powering on)
+        direct_thermal - True if using direct thermal labels
+        label_height   - tuple (label height, label gap) in dots
+        label_width    - in dots
+
+    z.reset_default()
+      Resets the printer to factory settings using EPL2
+
+    z.reset()
+      Resets the printer using EPL2 - equivalent of switching off/on
+
+    z.autosense()
+      Run AutoSense by sending an EPL2 command
+      Get the printer to detect label and gap length and set the sensor levels 
+
+    z.print_config_label()
+      Send an EPL2 command to print label(s) with current config settings
+
+    z.store_graphic( name, filename )
+      Store a 1 bit .PCX file on the label printer using EPL2
+        name     - name to be used on printer
+        filename - local filename
+
+    z.print_graphic( x, y, width, length, data, qty )
+        Print a label from 1 bit data, using EPL2
+          x,y    - top left coordinates of the image, in dots
+          width  - width of image, in dots.  Must be a multiple of 8.
+          length - length of image, in dots
+          data   - raw graphical data, in bytes
+          qty    - number of labels to print
+
+    z.output( commands )
+      Output raw commands to the printer
+
+    z.print_config_label()
+      Print label(s) containing the current printer configuration using EPL2
+
+Note:
+
+If you are on a Linux or MacOSX machine using CUPS, you may need to set up a
+printer queue using the admin panel at http://localhost:631